11
RIDING MOWER LIFT
STEP 6
OPERATING INSTRUCTIONS
Raising Mower Lift to Locking Position
• Raise the lift until the lower axle drops into one of the
two notches in the Locking Bar. The locking heights
are approximately 16” and 20” (full height).
• The Locking Bar automatically drops to engage the
lower axle when raising the mower lift.
STEP 7
Preparing the Mower for Service
• Place Wheel Chocks (not included) behind the back tires of the
mower.
• Apply the parking brake on the mower.
• The lower axle must be engaged in one of the notches of the
Locking Bar.
Wheel Chock
STEP 8
Lowering the Mower
• Remove Wheel Chocks.
• Release the parking brake.
• Mower must be in neutral or hydraulic
drive disengaged.
• Lift up and hold the Locking Bar with your foot
and turn the Crank Handle clockwise until the
wheel pads are firmly on the ground.
The Locking Bar must be lifted up until
it clears the last notch.
It may be necessary
to raise the lift slightly to allow the Locking Bar
to be lifted up.
Locking Bar
Notches
Lower Axle
Lift Locking Bar
when lowering
