Mohr CT100 Скачать руководство пользователя страница 25

Страница: 25 / 121

Operating Instructions

Setting up the CT100

Setting date and time

The date, time, and time zone must be accurately set for saved data in the CT100 to be
correctly time-stamped.

Change the date and time by pressing the blue (

MENU

) button. This calls up the

Main

menu.

Select the

Info

menu option using one of the eight menu hot keys, as labeled on the screen.

The

Info

menu appears.

Select the

Time

menu option. The

Time

menu appears.

Select the

Set Time Zone

menu option. A dialog box listing all time zones appears on the

screen.

Use the

M-FUNCTION

knob to scroll through the list of time zones. Highlight the correct time

zone.

Choose the

Select

menu option. The CT100 will prompt you to restart. After doing so, the

CT100 will be set to the correct time zone. Note that daylight savings should be turned on,
and it will automatically adjust for daylight savings on the correct dates.

After restarting the CT100, the time may already be correct, but if not, return to the

Time

by pressing the blue (

MENU

) button, selecting

Info

, then selecting

Time

Select the

Time/Date

menu option. A dialog box used to set the date and time appears. See

the next section for methods of navigating and entering data into a dialog box.

Press the

menu option when the correct time and date have been entered.

Navigating dialog boxes

Scroll through the different entry boxes with the

M-FUNCTION

knob. With an entry box

selected, press the

Keyboard

menu option to call up an on-screen keyboard.

With the on-screen keyboard chosen, select the desired characters with the

M-FUNCTION

knob, pressing the

Select

menu option for each one. Get more character options by selecting

the

Shift

menu option. Delete the character before the cursor with the

Back

menu option.

With the keyboard open, accept the current entry with the

menu option or revert to the

original entry with the

Cancel

menu option.

With the keyboard off the screen, select the

menu option to accept all changes to the

current dialog box and close the dialog box. Select the

Cancel

menu option to close the dialog

box while canceling all changes.

With a USB keyboard attached, entries can be changed directly. Use the

tab

key to scroll

down through entry boxes and hold down

shift

and press

tab

to scroll up through entry boxes.

Mohr CT100 / CT100HF Operator's Manual

Содержание CT100


























































































































Результаты поиска

Содержание CT100

Отзывы:

Бренды по названию

Популярные бренды

Mohr CT100, Руководство оператора

Результаты поиска

Содержание CT100

Отзывы:

Бренды по названию

Популярные бренды