manualshive.com logo in svg

MOGAS Watson Series, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
MOGAS Watson Series Скачать руководство пользователя страница 9

© Copyright 03/31/2021 MOGAS Industries, Inc.   

www.mogas.com

9

SECURE VALVE IN PLACE

For raised-face flange connections, install flange 
gaskets and bolting per customer requirements. When 
securing other end types, please contact MOGAS 
Service for proper procedures.

Note:

MOGAS valve flanges are supplied in the customary “straddle centerline” 

hole orientation, unless otherwise specified. 

Straddle centerline hole orientation

PROTECTING THE VALVE

The valve should be lifted with slings around the valve 
and not from the stem or actuator. 

Flanged raised faces should be protected at all times 
prior to installation to prevent possible damage.

Note:

Actuator, gear operators and handle stops are pre-set at the factory 

and should not require any further adjustments. Should the actuator or 

gear operator require removal for installation, please call the factory or 

authorized Service Company first.

POSITION VALVE IN PIPING

Verify that the valve and actuator / handlever 
orientation is correct.

Verify that the valve is in the 

open

 position to prevent 

any damage to the ball surface from debris.

Position the valve in line with mating flanges.

Note:

Support or lift as required, using lifting lugs or nylon straps around the 

valve body. Do not lift or support by the actuator alone.

 3

Installation

2

4

CAUTION!

Temperature and media compatibility should be 
verified prior to installation to assure the valve is 
able to perform in the desired application.

!

Содержание Watson Series

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды