manualshive.com logo in svg

MOGAS Watson Series, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
MOGAS Watson Series Скачать руководство пользователя страница 2

© Copyright 03/31/2021 MOGAS Industries, Inc.   

www.mogas.com

2

All MOGAS valves operate 

counter-clockwise to open, clockwise to close

.

MOGAS valves are supplied in a variety of operator configurations based 
upon customer requirements, and may be operated by 

•  manual actuation (handlever) 

•  pneumatic actuation

•  worm gear actuation (handwheel) 

•  hydraulic actuation

Each of these operator configurations may be installed and tested prior to 
shipping, or shipped separately, depending on customer requirements.

Some valves are supplied with a bare stem or stem adaptor kits to 
accommodate a variety of manual or actuated operators.

Please note the configuration of each individual valve and proceed with any 
necessary operator adaption procedures prior to installing the valve.

CLOSE

OPEN

Sequential procedure 

required to perform operation.

Bold

 numbers correspond 

with items shown in the 

Valve 

Item Reference Number

 

sections.

Warning statement 

to prevent unwanted 

consequence.

Note(s) 

to support 

procedure.

All information within this manual is relevant to the safe and proper 
care of your MOGAS ball valve. Please understand the following 
examples of instructional information: 

General information

 or 

an alternate / variation 

procedure.

Read Before Installing Valve

How to Read this Manual

Note:

The normal direction of flow is from the higher pressure end (upstream) 

to lower pressure end when the valve is 

closed

.

CAUTION!

Ensure key length provides and maintains full 
engagement. 

THIS WILL AFFECT THE VALVE WARRANTY.

!

PRE-INSTALLATION STORAGE

Valves shall remain stored in their shipping crates  
with the lids secured.

INSTALL STEM ADAPTOR

Align stem adaptor 

13

 so the keyways on stem 

adaptor correspond with the keys 

6

 on stem 

5

.

 5

Содержание Watson Series

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды