4: Operation
The dispenser runs one time per 72 hours if not used to avoid clogging.
Loading Gel
• Open the large door and place Gel containers into the compartment.
• Remove the bottle lid and pierce the bottle seal.
• Carefully push the vertical rubber tube into the bottle.
Ensure the tube is inserted all the way to the bottom of the gel bottle.
• Open the top door and check the battery is plugged in.
• Close the doors remove keys and store them in a safe location.
• Place hand under the dispensing nozzle 20 times to allow the Gel to pump through
the unit, when the Gel starts to appear continue for an additional 3 times to ensure the
system is functioning correctly.
Note: Dispensing volume is factory set
Models: SDHU, SDCU, SDRU. SDRUCT, SDSU.
6
Models: SDBU.
Battery.
Charger.