1: Specification
Model
SDHU
SDCU
SDRU
SDRUCT
SDBU
SDSU
Weight
(kg)
20
40
60
120
25
100
Dimensions
L X W X H (mm)
450 x 281 x 622
500 x 400 x1470
550 x 425 x 1472
1196 x 750 x1522
500 x 400 x 1470
850 x 400 x 1470
2: General Installation
Before installation please read the following points:
•
When placing the unit in position ensure there is adequate access.
1.
Remove all packaging & plastic coatings from the appliance.
2.
Check for any damage.
3.
Assemble all parts and carefully unpack the Battery pack
and place in position. (See page 6 to 8)
4.
Drop the Gel pump tube into the sanitising Bottle (see page 6 to 8)
5.
Connect the battery to the dispensing cable. (See page 6 to 8)
6.
Place hand under the dispensing nozzle 8 times to allow the Gel to pump through
the unit, when the Gel starts to appear continue for an additional 3 times to ensure
the system is functioning correctly.
Do not site in direct sunlight.
Sun reflection may affect the dispensing sensor.
NOTE:
The battery must be charged and discharged three times before the maxi,um
capacity is realised.
Only use the battery charger supplied in a dry environment with a temperature
of between 10 °C and 40 °C.
Before the first use, 15hours are required in order to reach a full charge.
Based on an average of 120 uses per day,
the battery will last 58 days before needing recharged .
Power supply
Battery 12v 7Ah Lead Acid
with Fused 2.1mm with DC
power lead 1.5m
12v Lead acid charger
750mA with 2.1mm DC outlet
3