INSTALLATION INSTRUCTIONS
2. Screw one end of the Hose Assembly
(8)
onto the T-Fitting. Hold the
T-Fitting while tightening the Hose Assembly Nut.
3. Finally, connect the sink’s cold water supply line to the remaining open end
of the T-Fitting.
Attach Filter Mounting Bracket to Cabinet Wall
Begin by screwing the Stop Valve (packaged in the T-fitting & Stop Valve
hardware pack
(3)
)to the Filter Life Indicator Module
(12)
taking care not to
overtighten plastic threads on the Filter Life Indicator Module. Tighten snugly
until black lever is facing the front or top for easy shut off when changing filter in
the future.
CAUTION: The Stop Valve must be installed to allow filter replacement.
INS412A
8
HELPLINE: 1-877-DRINK-H2O
(1-877-374-6542)
Stop valve
