Moen PureTouch AquaSuite 77100, Руководство пользователя

Страница: 4 / 18

3 HELPLINE: 1-877-DRINK-H2O
(1-877-374-6542)
INS412A
WATER FILTRATION SAFEGUARDS
Your Moen PureTouch ® AquaSuite System utilizes carbon block filtration made
by Culligan ® . This technology is fast and effective at reducing contaminants
commonly found in water and is certified by NSF ® International. To ensure
optimal operation of your new PureTouch filtration system, please read the
following safeguards carefully.
MicroTech ® Filters
• MicroTech filters will reduce:
Chlorine, Taste and Odor
Lead
Cysts (Cryptosporidium, Giardia)
Lindane
Atrazine
Mercury
Turbidity
The contaminants removed or reduced by this filter are not necessarily in your water.
• Do not use with water that is microbiologically unsafe or of unknown quality
without adequate disinfection before or after the system. Systems certified
for cyst reduction may be used on disinfected waters, since they may also
contain filterable cysts.
• MicroTech filters are designed for replacement after dispensing 750 gallons
of filtered water, or after 6 months (whichever comes sooner). Water
conditions and usage may affect filter life.
• The electronic indicator will signal when filter replacement is necessary
(See “Operating Instructions” on page 11).
• Use only MicroTech 9000 filters with the PureTouch AquaSuite.
• Filter flow rate = 1 gpm at rated pressure.
• Maximum operating pressure = 125 psi.
Water Temperature
• CAUTION: Do not filter water above 100°F (37° C). For cold water supply only.
MicroTech ® Filter Flushing Instructions
• New MicroTech Filter: After installing a new filter, allow cold water to run
through a new filter for 5 minutes to flush out any loose carbon particles.
Once these small particles are washed out the filter is ready for use. The
filter life indicator will alternately flash amber & green for the first five
minutes after the indicator is manually reset as an aid in timing the filter
flushing period. The filter life indicator will then flash only green when the
flushing period is complete.
• Daily Use: Allow cold water to run through the filter for 10-15 seconds prior
to first use. If the filter has not been used for two days, run cold water
through the filter for 30 seconds prior to the first use.
Questions
If you have any questions please call our toll-free helpline at:
1-877-DRINK-H2O (1-877-374-6542)
Monday thru Friday 8am - 8pm EST
Saturday 8am - 6:30pm EST