Customer Service 908-368-1025
︱
Page 6 of 10
STEP 7:
STEP 8:
Hx4
Hardware and Tool required
Ax8
Hardware required. Screwdriver not included
www.modway.com
1
I
H
I x1
A
EEI-3860
Cabinet
H
H
H
A
A
A
A
A
A
A
7.1- Due to unstable structure,
carefully place the assembly from
STEP 6
with flat edges
(without dowel edges)
facing down onto flat surface.
7.2- Carefully align the
Bottom Panel (1)
pre-drilled holes to the pre-assembled
Dowel on both of the
Side Panels (Left & Right)
edges,
and secure it by tightening 4 nos
of
Hex Screws (H)
with the provided
Allen Key ( I ).
Ensure the
Cambolt (A)
is inserted
in the correct pre-drilled hole.
(The smaller pre-drilled hole).
Note: Ensure these pre-drilled holes are
facing upwards during assembly.
Carefully insert the
Cambolt (A)
to the pre- drilled holes.
Securing the
Bottom Panel (1)
3
2
Note:Ensure these
pre-drilled facing
upwards during
assembly
3
2
Pre-inserted
Cambolt (A)
to anchor Leg Assembly (completed in Step 2)
Mx1