MODUS – Instruction for Use – Version 2.0
4.
Connections plan
LEDs are connected to control and supply outputs in a way presented in the figure. On
every line there can be a defined amount of light, which depends on the received power
and the loadability of every line is max. 500mA. Therefore with all receivers connected
sum up all lines and select a feeder of an appropriate power.
CAUTION!
Current loadability of a single connection shall not exceed 10A!!!
In order to increase the current loadability of the power supply joint attach power supply
leads parallel to a number of proper inputs (e.g. to attach 2 wires to one pin) to increase the
permissible current. The driver is provided with 2 power supply inputs - one for the first
24 channels and the second for channels 24 - 48. Connect these to one feeder or to two
feeders.
At the last driver in the DMX
line install a terminator
