Modular Clarity LED, Руководство по установке

Страница: 2 / 11

2
IMPORTANT SAFETY INSTRUCTIONS
• To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions,
and other hazards please read all warnings and instructions included with and on the fixture box and all fixture
labels.
• Before installing, servicing, or performing routine maintenance upon this equipment, follow these general
precautions.
• Installation and service of luminaires should be performed by a qualified licensed electrician.
• Maintenance of the luminaires should be performed by person(s) familiar with the luminaires’ construction and
operation and any hazards involved. Regular fixture maintenance programs are recommended.
• It will occasionally be necessary to clean the outside of the refractor/lens. Frequency of cleaning will depend on
ambient dirt level and minimum light output which is acceptable to user. Refractor/lens should be washed in a
solution of warm water and any mild, non-abrasive household detergent, rinsed with clean water and wiped dry.
Should optical assembly become dirty on the inside, wipe refractor/lens and clean in above manner, replacing
damaged gaskets as necessary.
• DO NOT INSTALL DAMAGED PRODUCT!
This luminaire has been properly packed so that no parts should have been
damaged during transit. Inspect to confirm. Any part damaged or broken during or after assembly should be
replaced.
• These instructions do not purport to cover all details or variations in equipment nor to provide every possible
contingency to meet in connection with installation, operation, or maintenance. Should further information be
desired or should particular problems arise which are not covered sufficiently for the purchaser’s or owner’s
purposes, this matter should be referred to Modular Services Company.

Disconnect or turn o
ff
power before installa
ti
on or
servicing.

Verify that supply voltage is correct by comparing it
with the luminaire label informa
ti
on.

Make all electrical and grounded connec
ti
ons in
accordance with the Na
ti
onal Electrical Code (NEC) and
any applicable local code requirements.

All wiring connec
ti
ons should be capped with UL
approved recognized wire connectors.
WARNING
RISK OF ELECTRIC SHOCK

Allow lamp/
fi
xture to cool before handling. Do not
touch hot lens, lamp, guard, or enclosure.

Do not exceed maximum wa
tt
age marked on luminaire
label.

Follow all lamp manufacturer’s warnings,
recommenda
ti
ons and restric
ti
ons on lamp opera
ti
on
including but not limited to: ballast type, burning
posi
ti
on, replacement, and recycling.

Use only lamps that comply with ANSI standards.
WARNING
RISK OF BURN

Wear gloves and safety glasses at all
ti
mes when
removing luminaire from carton, installing, servicing or
performing maintenance.

Avoid direct eye exposure to the light source while it is
on.
CAUTION
RISK OF INJURY

Keep combus
ti
ble and other materials that can burn
away from lamp/lens.

Do not operate in close proximity to persons,
combus
ti
ble materials or substances
aff
ected by heat
or drying.
CAUTION
RISK OF FIRE
Please see product specific installation instructions for additional warnings or any applicable FCC or other regulatory statements.
Failure to follow any of these instructions could void product warranties.