Modular Clarity LED, Руководство по установке

Страница: 8 / 11

8
4. Figure 2A shows the alignment of the wiring holes between the Clarity LED fixture and the backplate.
Alignment of Wiring Holes Between the
Backplate and the Clarity LED Fixture
Hanging the Fixture
1. Align slots in back of fixture with studs in backplate.
2. Hang Clarity LED (HPW) fixture on backplate; engaging fixture hook over backplate hook.
3. If the bed power interrupt switching (“bed-stop”) option was ordered, see Figure 3 for assembly of the
provided spacers over the backplate studs. If bed-stop option is not provided, omit the spacers shown in
Figure 3.
4. Secure the fixture with the washers and nuts provided.
5. If bed-stop option is provided, test fixture for free vertical movement. The fixture must be free to ”float”
vertically for proper bed-stop operation (see Fig. 5).