Modul-Connect DC-DC 30A, Руководство пользователя

Страница: 11 / 16

11
OPTION 3:
Connect to a vehicle positive (+)
ignition supply via the supplied 2A
fuse using OEM vehicle manufactures
recommendations.
4. UNIT OPERATION
• The Modul-Connect Battery
Charger DC-DC 30A operates with
an input voltage between 9-32V.
• The battery charger is turned on
and off with the vehicle ignition.
• The output current is limited to 30A
for the charger.
• In case of a low input voltage
(<9V), the output voltage is reduced
to prevent damage to the charger.
LED status colour Status LED output Mode Note
Off Off Off Ignition off. The charger is
switched off.
Red Flashing Fault mode Refer to the codes below
for the number of short
flashes followed by
number of long flashes.
Amber Constant flashing Charging Current/boost charging.
Green Constant flashing Charging Float charging.
• The charger is protected against
overheating and resumes normal
operation when it cools down.
• The 3-colour status LED on the
battery charger end panel shows
the status of the charger. In ‘normal’
operation the LED will either be off
(ignition key off), flashing amber
(charging) or green (charged).
• The 3-colour status LED also shows
the status of the charger as follows:
Further connection information for vehicle
makes and models is available from
Modul-System.