background image

6  

 

INSTALLATION 

INSTALLATION 

INSTALLATION 

WARNING - RISK OF FIRE!

 

The  power  cord  must  not  be  pinched  or 
against  a  sharp  edge.  Secure  cord  to 
avoid tripping or snagging to reduce the 
risk of fire, electric shock or personal in-
jury.

 

Do not run cord under carpeting. Do not 
cover  cord  with  throw  rugs,  runners  or 
the  like.  Arrange  cord  away  from  traffic 
areas  and  where  it  will  not  be  tripped 
over.

 

WARNING - RISK OF FIRE!

 

To  prevent  a  possible  fire,  do  not  block 
air  intake  or  exhaust  in  any  manner.  Do 
not use on soft surfaces where openings 
may become blocked.

 

WARNING - RISK OF FIRE!

 

Do  not  blow  or  place  insulation  against 
the firebox.

 

Installing fireplace

 

Select  a  suitable  location  that  is  not  suscep-
tible  to  moisture  and  is  a  safe  distance  from 
drapes,  furniture  and  high  traffic  areas.  A 
qualified  electrician  should  add  an  electrical 
outlet  per  local  building  codes.  The  included 
power  cord  is  73  1/2  inches  long,  the  outlet 
should be installed within 70 inches of the rear 
right corner of the fireplace. 

Note:  Follow  all  national  and  local  electrical 
codes.  

WARNING:  If  the  fireplace  has  a  gas  line 
present,  a  plumber  or  fireplace  technician 
should  cap  the  gas  supply  according  to 
local building codes.

 

WARNING: Avoid the use of an extension 
cord because the extension cord may 
overheat and cause a risk of fire. However, 
if you have to use an extension cord, the 
cord shall be No. 12 AWG minimum size 
and rated not less than 1500 watts. 

WARNING: If the information in these in-
structions  is  not  followed  exactly,  a  fire 
or explosion may result causing property 
damage, personal injury or death.

 

To reduce the risk of fire do not store or 
use  gasoline  or  other  flammable  vapors 
in the vicinity of this or any other heater.

 

 7 

 

1.  Make sure the fireplace is clean and 

free of debris. Install the fire feature 
according to the instructions included 
with that feature (the fire features 
include log set or contemporary glass 
burner.) Plug in the fire unit. 

2.  Simply slide the fire unit in to your 

existing fireplace. 

3.  Use the adjustable feet to adjust for 

the ash bed in some fireplaces. 

INSTALLATION 

4.  If desired, use the optional trim to trim 

your new fire place. 

5.  To install the optional trim, remove 

the 4 screws on the right and left side 
that hold on the glass face. Index the 
elongated screw holes on the metal 
trim over the screw holes for the glass 
face. Replace the screws. 

Содержание ZCR 3824







Отзывы: