modernflames.com
Installation and Assembly
Locate the two side uprights and insert sixteen (16) shelf pins
(included) into inner side walls, in predrilled holes. These are to
be placed below each of the four framing boxes. The pins will
support and index each of the four framing boxes.
Set sides of main wall upward with power cords
toward center and outlets outward. Wall side facing up.
Note: Lower notch on inner walls goes over baseboard
lower wall.
Make sure you are assembling on a flat level floor.
Place 1st framing on lower section, make sure
framing boxes are flush with the wall side of side wall.
Make sure boxes resting against shelf pins,
then proceed to install screws.
Partially install one screw until all four
(4) framing boxes are attached...
Wall Side
Keep flush
Keep flush
Make sure pins
below each box
Continue to make sure shelf pins are secure and below each
framing box for alignment and correct position.
Lower notch
Facia clamp,
faces floor when
assembling
Facia clamp,
faces floor when
assembling
1
2
3
4
5
6
