Modena RX 9503, Руководство пользователя

Страница: 23 / 28

English
20
-
Circular (V1-V2-V3-various models):
To install the filter, position the filter in the middle of the motor protection grill covering ensuring
that the reference to X1 or X2 or X3
on the carbon filter match the Y1 or
Y2 referenceson the conveyor, then
turnclockwise;
in case of
dismounting turn anticlockwise, if
provided with a Z tape, remember to
gently lift first.
WARNING :
-
Failure to perform basic maintenance
and cleaning instructions suction hood
and replacement filters can cause a
fire hazard.
-
Therefore, we recommend attention to
these instructions carefully.
-
Manufacturer disclaims all liability
for damage to the motor or fire
damage associated with improper
maintenance or failure to comply with
the above safety recommendations.
IV. Replacing lamps
-
Disconnect the hood from the electricity.
Warning! Prior to touching the light bulbs ensure they are cooled down.
-
Replacing lightbulbs 40W– remove the grid, Unscrew the damaged light bulb and replace with
an incandescent oval light bulb with a maximum of 40W E14. Remove
the grill in order to reach the light bulb area.
-
Replacing the halogen bulbs – To access the light compartment ,
extract the lamp cover by levering it off with a small screwdriver or
similar tool.
Replace the damaged light bulb with only use halogen bulbs of 20W
max (G4), making sure you do not touch them with your hands. Close
the lamp cover (it will snap shut). If the lights do not work, make sure
that the lamps are fitted properly into their housings before you call for
technical assistance.