English
17
•
Preparation
1. Place 2 pieces of battery.
2. Open the gas inflow and the water inflow valve.
•
Contact
When the water pressure is above 0.025Mpa, the valve will be executed automatically when
opening the hot water valve. For the water heater that is just installed, the gas pipe perhaps is filled
with air and can not be turned on at the first time. Repeat the on and off to throw the air until the
water heater turns on.
•
Temperature control
a. Adjust the water and gas until it is appropriate
b. If the water valve is installed by itself, cold water may not be turned too much, to prevent the
reduction of the pressure from the diffluence that affect the normal operation of the water
heater.
At some place, the water pressure might be too strong and thus the water cannot be heated. In this
case, please turn the water inflow valve down. ( like in the illustration picture below).
Flame on the panel of the water heater can be turned to the max or min ( like in the illustration
picture below).
c. Shut-off
To shut off the water heater, please shut off the hot water outflow valve or water inflow valve.
note
: water heater cannot be used continuously for a long time.
Part 3: How to use
Содержание Rapido - GI 6 V
Страница 2: ......
Страница 5: ...Bahasa Indonesia 3 Fitur dan kelengkapan tergantung pada tipe produk Bagian 1 Nama Nama Bagian ...
Страница 12: ......
Страница 22: ......