Modena PX 6001, Руководство пользователя

Страница: 18 / 26

-
Do not strike a fire under the sucker of the cooker hood.
-
The cooker hood is not aimed to be installed on top of the stove that had more than four furnaces.
Electrical Shock Hazards
-
Connect the unit only to a grounded power outlet correctly. If you are in doubt, ask advice to the
experienced technician who is suitably qualified.
-
The failure to follow these instructions may cause the electric shock, fire, or other hazards which are
fatal.
Preparations of installation:
b. If you have a waste pipe outside, the cooker hood can be connected using extraction duct (enamel,
aluminum, flexible pipe or a fire-resistant material with an inner diameter of 150 mm), see the following
picture:
b. Before installation, switch off the unit and unplug the power cord from the wall socket.
d. Installation of the cooker hood should be right on the top of the stove with a minimum distance of 65
cm and a height of maximum 75 cm from the surface of the stove.
Hood Installation (slim hood)
Cooker hood can be installed on a concrete wall or on the bottom of the kitchen set cabinet wall.
Installing on a concrete wall
-
Make a center line on the wall where it will be placed in the cooker hood.
-
Attach the template to drill the wall. If it is not completed by a template, attach the cooker hood to the
wall and give a sign to make a hole with a center hole spacing on the back of the cooker hood.
English 15