Modena FC 3 Series, Руководство пользователя

Страница: 25 / 37

English 21
 If you don’t understand the procedure for installing freestanding stove, do not hesitate to contact
the MODENA Service Center for installation procedure.

Prepare the required supporting equipments for installation, for example:

LPG cylinder

Standard gas supply hose with safety leak equipment.

Hose clamp

Low-pressure gas regulator

Gas lighter

Room ventilation
The room where gas equipments are to be stored must have proper air ventilation to enable free
flow of air. Any room with inadequate ventilation system will have more emission gas molecules
than the oxygen, resulting in imperfect flammation (flame will become yellow in color due to lack of
oxygen). As such, make sure that the room where gas equipments are contained have proper
ventilation.

Prepare easily accessible electrical socket for your stove power cord.
3.A Installation
A.1
Open the stove carton box / packaging.
A.2
Some stoves are equipped with four corner supports. Install the
supports under the stove on every corner. Use nut (A) and wrench
to secure the supports. (Figure 1)
A.3 Connect the gas stove to the stove and regulator by following the route specified in Figure 2,
and secure both connections using hose clamp.
2
Part 3:
Installation Procedure
Part 2:
Preparations before Installation
NOTES:
1. If the stove is not leveled, rotate the support (B) to adjust the height
– Look at the
figure.
2. In order to avoid any damage by rodents, we highly recommend setting up anti-
rodent traps around the gas stove (Optional).