English
14
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
If the water heater is used with a spray head, the spray head must be descaled regularly.
The outlet must not be connected to any tap or fitting other than those specified.
The new hose-sets supplied with the appliance are must to be used for connecting to the water
mains, old hose-sets should not be reused for connecting to the water mains.
Children should be supervised to ensure that they do not play with the appliance.
WARNING:
Do not switch on if there is a possibility that the water in the heater is frozen.
This product should not be disposed of with household waste.
Please recycle where facilities exist and check with you local authority for recycling advice.
APPLICATION & FEATURES
Function: This water heater could be used for dish washing, teething, etc.
Features:
Good material: Adopt ABS engineering plastics shell, anti-corrosion and durable; selects the high
quality stainless steel pressure type heating materials, incrustation scale prevention, long service life;
Thermal circuit breaker, thermostat, or other main parts are purchased from the famous manufacture
from home and aboard.
Energy and electricity saving: Heating quickly, obvious energy saving.
Safe and reliable: Strict enforcement of national standards, sensitive leakage prevention, over-
temperature prevention and over-pressure prevention, dry heating protection. Get the security
authentication. High-grade waterproof structures ensure the safety use under the bad environment.
Convenient operation: The outlet temperature could be adjusted at any degree by the multi functional
valve, which meets the different requirement. The water pressure is n normally used in the range of
0.02-0.6MPa.
ATTENTION
The power socket should use the standard one, which specification should be 16A/250V~.And the
wire connection must be correct, and having a good earthing connection, showed as the below
picture.
The socket should be installed in the humidity of
≤80%, and beside the water heater. It could not
be installed below the water heater.
The water heater should use the independent socket which have the reliable earthing connections
Water route and the sewer pipe could not be the grounding.
There are some water-drops which is due to the high water-supply pressure.
Part 3:
Installation
