Modena Conesso Series, Руководство пользователя

Страница: 8 / 15

8
• Check all the plumbing (piping) connections to early detect leakage
before turning on this electric storage water heater.
• Make sure that the tank has been fully filled up with water;
otherwise it can cause the heating elements to be damaged.
• The water heater needs to be turned on for certain period of time
to reach the desired temperature.
• During the heating process, it is normal to see a bit of drip from the
safety valve. Do not cover the safety valve outlet hole.
• Connect the water outlet hole to a drainage pipe. Water may drip
from the safety valve of the drainage pipe of; therefore, this pipe
must be exposed to the atmosphere (air).
• The safety valve needs to be operated regularly (preferably at
least every six months) to remove the limestone deposit and to
ensure that it is not blocked.
Operation Guidelines
•
Temperature Setting: press buttons to adjust the
temperature scale ranging from 30-75°C.
• Time Setting: Long press button for over 2s to set the clock
time. When the hour clock is flashing then press to set the
hour data. Re-press to set the minute data. System will quit
automatically if there is no operation in 5s.
• Standard Heating: the water heater will be in the full working cycle
to keep the hot water at the set temperature for 24 hours.
•
Heating Timer: the water heater will ensure a hot water supply
with the set temperature at the required time
.
• Wi-Fi Controller: users can install the customized Apps (IOS or
Android version) on smart-phone; connect to Wi-Fi or cellular data
(3G/4G) to control the water heater.
• Remote control configuration: turn on the water heater within 15s;
press
buttons to enter configuration; then, the water
heater will beeps if the configuration is successful.
PART 4: HOW TO USE