Modena Conesso Series, Руководство пользователя

Страница: 10 / 15

10
6. Click ''Go to connect'' to enter to the Wi-Fi-choosing pages in
smart phone.
7. Select ''SmartLife'' hotspot and connect.
8. The application will do pairing with the device, wait until the
process 100% finish.
9. After ''Device added successfully” notification appears, click
''Done'', and the application is ready to use.
10. If it fails, click ''Retry'' and repeat above steps.
Resetting The Factory Default Setting
buttons to reset the factory default setting
Factory Default Setting
Standard Time Mode Temperature Setting Rated Power Input
12.00 Standard Heating 75 °C 500 W
General Instruction
• Check the power plug and the power socket as often as possible.
Electrical contact must be secured and also must be provided
proper grounding. The power plug and the power socket must not
heat excessively.
• If the water heater is not used for a long time, especially in regions
with low air temperature (below 0
o
C), it is necessary to drain the
water from the heating tank to prevent damage of the water heater
due to the water-freezing in the internal tank. Refer to the
“Important Safety Information” part in this manual book for the
method of draining away the water from the internal tank.
PART 5: MAINTENANCE
WARNING!
Do cut off the power supply before do the water heater
maintenance to avoid the danger of electric shock.
Press