Modena Calma Series, Руководство пользователя

Страница: 9 / 21

8
Note: This program cannot dry the clothing completely
- Down Jacket
This program is suitable for washing down feather clothing (not applicable to pillow or quilt).
-
Spin
Program to spin spare water from laundry
-
Rinse + spin
Suitable for laundry that uses spin only or spins with softener.
-
Mix
This program is used for washing cotton and linen, chemical fiber and similar clothes with mixed
materials.
-
Quick Wash
This program is suitable for washing slightly soiled clothing that is worn only once or needs a
little washing with a special smell.
- Wool
This program is suitable for washing machine – washable woolen fabrics. Washing capacity is
max 2.0 kg.
-
Bedding
This program is suitable for washing bedspread, bed sheet, quilt cover, etc. The optimal
washing effect can be achieved when only washing one type of bedding below 2.0 kg.
-
Drum Clean
This program is suitable for washing the inner drum. This program is designed to remove dirt
and bacteria inside the drum. When the cylinder icon is on, it means the inside cylinder of the
washing machine needs to be cleaned.
-
Additional Program
For certain condition, below programs can be used.
Attention: Additional program can be different depending on product type.
-
Rinse +
Suitable for adding extra rinse on washing cycle, and it can minimalize the remains of detergent
on clothes. So the bad effect of remaining detergent can be minimized on sensitive skin (baby,
allergic, etc.). The maximum additional rinse is five times.
-
My Cycle
After selecting this function, any common or special washing program can be designed and will
be memorized.
It will bring much convenience when washing the clothing of the same kind. (Set this function
according to the water temperature, spin speed and degree of dirt, etc.) Setting method of My
cycle:
1.
Press “Power” button to start the washing machine
2.
Select the desired washing program by rotating “Program” knob, and set the
other parameters
3.
Press “Temp.” and “Stains” buttons and keep for 3 seconds, the current
program and option settings will be saved, and LED light will be on
When washing the clothing of the same kind next time, the saved washing program and option settings
will be chosen automatically after selecting My cycle. You may repeat the above steps to modify the
settings of My cycle.
-
Time Delay
This function makes it possible to delay the starting time up to 24 hours. The setting can be
made at intervals of 30 minutes. This function can be activated by following these steps:
1.
Press “Delay” button to select the desired delay time.
2.
Press “Start/Pause” to activate this function.
3.
Press “delay” and “power” to cancel this function.