Modena Calma Series, Руководство пользователя

Страница: 15 / 21

14
Do not use damaged power cord or plug, especially if the plug
cannot fit to the outlet.
If there is damage to the power cord immediately contact
the MODENA call center for replacement. Replacing the
power cord must be done by personnel with experience and
understanding of electricity. Never replace the power cord
by yourself, due to the dangers that could lead to harm to
you and the others
.
This appliance cannot be used by children and persons with limited
physical, sensory or mental capabilities or lack of experience and
knowledge.
The glass on the door of the washing machine may become hot when
using programs with high temperatures. Keep the unit out of the children.
Children are forbidden to play with this appliance and should be watched
closely.
Program cannot be
started or selected.
-
Machine may have switched to self-protection mode due to an
infrastructure problem (such as line voltage, water pressure, etc.).
Reset your machine by pressing ’Start/pause’ button for 3 second.
Vibrate and eject noise
-
Machine might be unbalanced.
Adjust the feet to level the machine.
-
A hard substance might have entered into the pump filter.
Clean the pump filter.
-
Transportation safety bolts are not removed.
Remove the transportation safety bolts.
-
Laundry quantity in the machine might be too little.
Add more laundry to the machine.
-
Machine might be overloaded with laundry
Take out some of the laundry from the machine or distribute
the load.
-
Machine might be leaning on a rigid item.
Make sure that the machine is not leaning on anything.
Machine stopped shortly
after the program started.
-
Machine might have stopped temporarily due to low voltage.
It will resume running when the voltage restores to normal
level.
Program time does not
countdown. (On models
with display)
-
Timer may stop during water intake.
The timer indicator will not countdown until the machine takes an
adequate amount of water. The machine will wait until there is a
sufficient amount of water to avoid poor washing results due to the
lack of water. Timer indicator will resume countdown after this.
-
Timer may stop during heating step.
Part 8:
Troubleshooting