Modena Calma Series, Руководство пользователя

Страница: 14 / 21

13
program, use Cottons-90 program and
select
Additional Water or Extra
Rinse auxiliary functions as well.
- Run the program without any laundry in the machine. Before starting the program, put max. 100
g of powder anti-limescale into the main wash detergent compartment. If the anti-limescale is in a
tablet form, put only one tablet into compartment main wash.
-
Dry the inside of the bellow with a clean piece of cloth after the program has ended.
Note: Repeat Drum Cleaning process every 2 months. After every washing, make sure that no
foreign substance is left in the drum.
If the holes on the bellow shown in the figure is blocked, open the holes using a toothpick.
Foreign metal substances will cause rust stains in the drum. Clean the stains on the drum
surface by using cleaning agents for stainless steel. Never use steel wool or wire wool.
Warning: Never use sponge or scrub materials. These will damage the painted and plastic
surfaces.
Do not pull or plug in the
plug to the socket with
wet hands.
The washing machine
must be connected
with the electric source
that
has been
grounded.
Do not use branched
wiring
with other
electrical tools.
Do not place the
washing machine in a
place
with direct
sunlight or near other
heat source.
The washing machine
door
cannot be
opened until 3 minutes
after the cycle is over
or
the washing
machine is turned off.
For maintenance, plug
out
the washing
machine from socket
Do not pull the cable or
other parts of the
machine to remove the
plug from the power
socket.
After usage, it is
suggested to plug out
the electric cable from
the socket, turn off
the water faucet and
close the washing
machine door.
Part 7:
Precaution Action