ModemSupply MS51p1 Скачать руководство пользователя

Страница: 10 / 16

connected to the remote, since the DHCP server within the ADSL gateway only

has a single IP address to assign to a LAN device.



NAPT and firewall are disabled when this option is selected.



The gateway becomes the default gateway and DNS server to the computer

through DHCP using the LAN interface IP address.



The gateway extends the IP subnet at the remote service provider to the LAN

computer. That is, the PC becomes a host belonging to the same IP subnet.



The ADSL gateway bridges the IP packets between WAN and LAN ports, unless

the packet is addressed to the gateway's LAN IP address.

3. Deselect

Enable IGMP Multicast

, and select

Enable WAN Service

and then click

Next.

Configure the DSL Router’s IP Address and Subnet Mask for LAN interface. In this

page, you can use DHCP (Dynamic Host Configuration Protocol) to control the

assignment of IP addresses on your local network (LAN only).

Содержание MS51p1

















Результаты поиска

Содержание MS51p1

Отзывы:

Похожие инструкции для MS51p1

Бренды по названию

Популярные бренды

ModemSupply MS51p1, Руководство пользователя

Результаты поиска

Содержание MS51p1

Отзывы:

Похожие инструкции для MS51p1

Бренды по названию

Популярные бренды