Model Train Technology 16 Port DCC LED Scene Controller II, Руководство пользователя

Страница: 10 / 24

9
MODEL TRAIN TECHNOLOGY ™
OPERATIONS
Use the POWER SELECTOR switch to select your power source. To turn on
the LSC II, slide the right-hand slide POWER ON/OFF switch to the RIGHT.
The blue LED on the top of the case will turn on.
The 4-number LEDs may flash or have on odd segment lit but after 2
seconds you will see “ 1234 ” on the display and then the numbers will
disappear. This indicates that all is working. At that point the LEDs that
you plugged in will all turn on depending on what FX setting you set. The
default mode for each port is ON and the brightness setting is 20%
The LSC II has two modes. It is either in Animation Mode or Configuration
Mode. If you see any red numbers on the top of the LSC II, the LSC II is in
Configuration Mode. If they are off and the blue light is on, the LSC II is in
Animation Mode.
If the blue light is off, the LSC II power is Off.