3
KIT CONTENTS
This instruction manual is designed to help you build a straight, great flying airplane. Please read this
manual thoroughly before beginning assembly of your new Sukhoi. Use the parts listing below to identify
and separate all parts before beginning assembly.
** KIT CONTENTS** We have organized the parts as they come out of the box for better identification
during assembly. We recommend you regroup the parts in the same manner. This will ensure you have all
of the parts required before you begin assembly and will also help you familiarize yourself with each part.
o
{2} Nylon Clevises w/2mm I.D. Hole
o
{2} 2mm x 138mm Threaded Rod w/L-Bend
o
{2} Nylon Snap Keepers
o
{2} Nylon Adjustable Control Horns
o
{2} Nylon Motor Mount Beams
o
{4} 3mm x 25mm Machine Screws
o
{4} 3mm x 20mm Machine Screws
o
{4} 3mm Nylon Insert Nuts
o
{4} 3mm Blind Nuts
o
{12} 3mm Flat Washers
o
{1} Plywood Wing Dihedral Brace (W-36)
o
{1} Gear Cover Mounting Block (D-31)
o
{4} Belly Pan Mounting Blocks (D-32)
o
{2} Balsa Triangle Supports (D-33)
o
{2} Aileron Servo Mounting Plates (W-37)
o
{1} Fuselage Servo Tray (D-10)
o
{1} Plywood Wing Bolt Doubler (W-39)
o
{2} Plastic Molded Instrument Panels
o
{1} Plastic Molded Spinner Assembly
o
{2} 3mm x 18mm Wood Screws
o
{2} 5mm x 30mm Machine Screws
o
{2} 5mm Flat Washers
o
{2} 5mm Blind Nuts
o
{4} 2mm x 10mm Wood Screws
o
{4} 2mm x 6mm Wood Screws
o
{1} Decal Set
o
{2} Wing Halves w/Ailerons and Hinges
o
{1} Fuselage
o
{1} Horizontal Stabilizer w/Elevator Halves and Hinges
o
{1} Vertical Stabilizer w/Rudder and Hinges
o
{1} Clear Molded Canopy
o
{1} Molded Fiberglass Cowl
o
{2} Plastic Molded Cowl Vent Sets
o
{1} Molded Fiberglass Belly Pan
o
{1} Molded Fiberglass Gear Cover
o
{1} Aluminum Main Gear Strut
o
{4} 4mm x 12mm Machine Screws
o
{8} 4mm Flat Washers
o
{4} 4mm Blind Nuts
o
{2} 4mm x 30mm Axle Screws
o
{4} 4mm Nylon Insert Nuts
o
{2} Nylon Axle Spacers
o
{2} 76mm Diameter Wheels
o
{2} 3mm x 15mm Machine Screws
o
{2} 3mm Flat Washers
o
{1} Nylon Tiller Arm
o
{1} Nylon Tail Wheel Bracket
o
{1} 25mm Diameter Wheel
o
{1} Tail Wheel Wire
o
{2} Wheel Collars w/3mm x 6mm Machine Screws
o
{3} 3mm x 12mm Wood Screws
o
{1} 2.5mm x 10mm Wood Screw
o
{1} Wood Dowel (D-34)
o
{1} 2mm x 90mm Wire w/L-Bends Both Ends
o
{2} 2mm x 210mm Wire Threaded One End
o
{2} Nylon Clevis w/2mm I.D. Hole
o
{1} Nylon Snap Keeper
o
{2} Nylon Control Horns (small)
o
{2} Nylon Control Horn Backplates (small)
o
{4} 2mm x 15mm Machine Screws
o
{1} Molded Fuel Tank
o
{1} 20mm Front Squash Plate
o
{1} 18mm Rear Squash Plate
o
{1} Rubber Stopper
o
{1} 70mm Length of Fuel Tubing
o
{1} Metal Weighted Pick-Up
o
{3) Aluminum Tubes
o
{1} 3mm x 20mm Machine Screw
ELEVATOR CONTROL SYSTEM
TAIL WHEEL ASSEMBLY
MAIN GEAR ASSEMBLY
AIRFRAME ASSEMBLIES
AILERON CONTROL SYSTEM
MOTOR MOUNT ASSEMBLY
MISCELLANEOUS ITEMS
FUEL TANK
THROTTLE CONTROL SYSTEM
o
{1} 2mm x 300mm Pushrod Wire w/Z-Bend
o
{1} Adjustable Servo Connector Assembly
o
{1} Wood Dowel (D-34)
o
{1} 2mm x 90mm Wire w/L-Bends Both Ends
o
{1} 2mm x 210mm Wire Threaded One End
o
{1} Nylon Clevis w/2mm I.D. Hole
o
{1} Nylon Snap Keeper
o
{1} Nylon Control Horn (large)
o
{1} Nylon Control Horn Backplate (large)
o
{2} 2mm x 15mm Machine Screws
RUDDER CONTROL SYSTEM
