Instruction Manual
Model Shipways developed its Flyer Class R/C boat kit in 1999. The design is based on plans and an article for a new Flyer
design, which appeared in “Building Plans For Forty-Three Small Boats-Ideal Series, Volume 17” by William W. Atkin and
Bruce N. Crandall, published by Motor Boating Magazine, 1936.
HISTORY
In the early 1930’s, the Flyer 91 Cubic Inch Class Racing Hydroplane Series was introduced as the smallest of the inboard
hydroplane racing classes. At only thirteen and a half feet long, the Flyers could keep up with boats much larger. Capable of
speeds over 45MPH, these boats were the perfect combination of speed, looks and control. Powered by a Grey Blue Streak Jr.
91.5 cubic inch engine, the Flyers cut every corner of their class restrictions with a finished weight of just over 600 lbs. This
boat was designed to move, and found favor with the general public as a fast runabout. Imagine yourself cruising the lakes in
one of these all mahogany masterpieces!
Miss Adventure represents one of the many Flyer Class race boats built throughout the US. The original craft was designed by
Bruce N. Crandall.
R/C Ship Model
Flyer Class Racing Boat
TABLE OF CONTENTS
Stage 1 -
Framing the Hull ........................................................................................................................................5
Stage 2 -
Installing the Frames and Breasthooks, and Center Keel Assembly ................................................5
Stage 3 -
Installing the Stringers ..............................................................................................................................6
Stage 4 -
Installing the Propeller Shaft....................................................................................................................7
Stage 5 -
Planking the Bottom of the Hull..............................................................................................................7
Stage 6 -
Installing the Rudder Shaft Tube ............................................................................................................8
Stage 7 -
Sealing the Rudder and Propeller Stern Tubes ....................................................................................8
Stage 8 -
Planking the Transom ..............................................................................................................................8
Stage 9 -
Planking the Hull Sides ............................................................................................................................8
Stage 10 - Sealing the Hull Interior ..........................................................................................................................8
Stage 11 - Locating and Supporting the Motor and Radio Control Components..............................................9
Stage 12 - Installing the Cockpit Floor and Seat......................................................................................................9
Stage 13 - Planking the Deck ......................................................................................................................................9
Stage 14 - Installing the Dashboard ........................................................................................................................10
Stage 15 - Installing the Deck Hatch Supports and Hatches ..............................................................................10
Stage 16 - Finishing the Outside of the Hull ..........................................................................................................11
Stage 17 - Installing the Cockpit Coaming and Fittings ......................................................................................11
Stage 18 - Reinstalling the Motor, Rudder, and Radio Installation, and
Ballasting the Boat....................................................................................................................................11
Parts List ......................................................................................................................................................................12
Parts Diagram ..............................................................................................................................................................13
- 2 -
Copyright 1999
Model Shipways Inc., a division of Model Expo, Inc.
Hollywood, FL 33022
