58
59
FX Tab
In the FX Tab you can load, initialise and save any of the FX presets as well edit any of the
global FX parameters such as Level and Distortion.
The FX preset selection box on the left will display that no preset is loaded if an fx parameter is
altered in any way, e.g. changing an fx parameter on Argon8 or loading a patch.
Also on this page you will find the external Audio In parameter that controls the amount of
Audio In signal sent through the 3 stereo FX engines.
Finally there is access to the 3 stereo FX engines that show the currently selected FX in each
slot and their respective controls.
Sequencer Tab
In the FX Tab you can load, initialise and save any of the Seq presets as well access the live
sequence controls such as Length, Hold, Loop and Quantise.
The top row of buttons in the bottom left will mute either the note row or any of the 4
parameter animation lanes.
The bottom row of buttons in the bottom left will clear the note row or animation lanes.
On the right you can draw in and edit the 4 animation lanes as well as change what
parameter that name is effecting.
Animation lanes cannot be altered while the Argon8 is recording. It is also not possible to alter
a lane without a parameter selected.
