40
41
Quick Recall
Eight Quick Recall buttons can be enabled to build lists of patches, sequences and animations
etc. that can be quickly accessed or stored.
To enable Quick Recall’s on the front panel of 008R push the button labelled Recall in the
bottom right. This enables the first 8 modulation source buttons to act as Quick Recall buttons
instead. To disable simply push the Recall button again.
To load a Quick Recall press and release the button. A list of what is currently on the Quick
Recall buttons can be seen on the main Quick Recall page that can be accessed by pressing
the third ‘menu button’ (C) twice.
On this page you can also load a new bank of Quick Recalls, banks can be saved in the same
way as patches or sequences and up to 100 banks are available. The bank contains the 8
Quick Recall slots that are present at the time of saving.
To access a slot to edit or load via the screen navigate to the corresponding slot number and
press ‘Select’.
Quick Recall Slot
The Quick Recall Slot page shows what is currently on the slot as well as providing options to
load or edit the slot.
There are 6 different types of Quick Recall Slot:
1. Patch:
this will load a Patch
2. Performance:
this will load a Bi-timbral (two patch) setup, sequences and animations
3. Sequence:
this will load a Sequence
4. Sequence Set:
coming soon
5. Animator:
this will load an Animation
6. Recall:
this will load a new Quick Recall Bank
To quickly save a Quick Recall Slot press and hold the Quick Recall button corresponding to
the slot number you want to save into.
