Mobius M9 SORTER Скачать руководство пользователя страница 5

5

SAFETY INSTRUCTIONS

To ensure operator safety while in use, this device includes decaling, guarding, and other safety features. 

Operators are encouraged to use caution and best judgment when using equipment. Equipment 

should be serviced when required. 

To avoid possible damage to the machine and risk of injury to the operator, consult with an ETEROS 

TECHNOLOGIES representative to answer any questions. 

All operators must read and understand this User Guide and be trained in safe operation and use of the 

M9 Autofeed Conveyor. We recommend the owner of this equipment develop a standard operating 

procedure specific to each worksite to address any local hazards or other conditions not outlined in 

this User Guide. The conveyor must be inspected regularly for damage, component failure and wear. 

Results of inspection activity should be documented. 

ETEROS TECHNOLOGIES makes every effort to ensure the M9 Autofeed is compliant with all current 

safety standards. It is the responsibility of the owner to ensure all municipal, provincial, state, county, 

territorial, and federal codes, regulations and standards have been met in each working location. 

Do not lend or rent your machine without providing the User Guide. A first-time operator should receive 

practical instruction before using the machine. 

This machine is not to be used for any purpose other than those expressly stated in the User Guide, 

advertising literature, or other ETEROS TECHNOLOGIES written material pertaining to the conveyors. 

DISCLAIMER

ETEROS  TECHNOLOGIES  recognizes  that  the  Infeed  and  Outfeed  Conveyors  are  purpose-built 

machines for processing cannabis by licensed producers. Please check all municipal, provincial/

state, and federal laws and regulations before using the Infeed and Outfeed Conveyors. ETEROS  

TECHNOLOGIES does not promote or condone the use of processing equipment in any way that may 

be deemed illegal.

ETEROS TECHNOLOGIES recognizes that our equipment can be used for processing herbs, hops, flowers 

and many other products. It is not the responsibility of ETEROS TECHNOLOGIES to confirm alternative 

applications for our equipment.

© 2 0 2 1   E T E R O S   T E C H N O L O G I E S   I N C .     A L L   R I G H T S   R E S E R V E D .     |       M O B I U S T R I M M E R . C O M

Содержание M9 SORTER































Отзывы: