Mobius M9 SORTER, Руководство пользователя, Страница: 19 / 30

19
© 2 0 2 1 E T E R O S T E C H N O L O G I E S I N C . A L L R I G H T S R E S E R V E D . | M O B I U S T R I M M E R . C O M
To remove the belt:
To re-install the belt:
For ease of use with other Mobius equipment, the orientation of the control panel can be reversed so
that it can be accessed from either side of the equipment. To switch the control panel:
1. Grab the handles on the HOPPER, and lift it off the conveyor.
2. While standing on the opposite side of the motor, use the TENSIONING TOOL to turn the BELT
TENSIONING STUB clockwise until significant resistance is felt. DO NOT KEEP TURNING PAST THIS POINT.
3. Once there is enough slack in the belt, simply slide it off the side of the conveyor.
1. Slide the conveyor belt on to the metal body from the side of the machine.
2. Ensure the groove on the underside of the belt is positioned in the slots of the rollers at each end.
You’ll feel the belt “click” into place once positioned correctly.
3. Using the TENSIONING TOOL, turn the BELT TENSIONING STUB counterclockwise until the belt is
tensioned. When the belt is adequately tensioned, the BELT TENSIONING STUB will provide significant
resistance against further turning. DO NOT TENSION THE BELT PAST THIS POINT. DO NOT USE A POWER
TOOL TO TENSION THE BELT. PERMANENT DAMAGE WILL RESULT.
1. Lift the CONTROL BOX off the CONTROL BOX MOUNTING BAR. No tools or fastener removal is required.
2. Rotate the CONTROL BOX so that it is facing the other side of the equipment, and place it down on
the CONTROL BOX MOUNTING BAR.
REMOVING AND INSTALLING CONVEYOR BELT
CONTROL PANEL ADJUSTMENT
GENERAL OPERATIONS