Mobility Research LiteGait 4Home, Руководство оператора и сервисное руководство

Страница: 16 / 31

16
www.LiteGait.com
1-800-332-9255
Charger
The LiteGait® battery is charged using a low current, hos-
pital guideline approved charger. The charger has an in-
dicator LED light that turns green when the charger is
plugged in and not connected to the LiteGait®. When the
battery is charging the LED turns red and then back to
green after the battery is fully charged.
Green Light
The charger is plugged into the socket (if
the battery is disconnected).
The battery is fully charged (If the
battery is connected and the charger is
plugged into the socket
Red Light
The battery is being charged by the
charger.
Below is a graphic showing the location of all cable that
plug into the control box for the LiteGait®. During use
the battery cable and hand switch cable should be
connected. When charging, the charger cable should be
plugged in and the LiteGait® should not be used.
Note: Ensure that all plugs are inserted completely and se-
curely.
V. Adjusting Handle Bars
Raising and Lowering the Handle Bar
Loosen each knob in equal portions. The knobs should
only need to be turned once to free the handle bars.
Once the knobs are loosened slide the handle bars to
the desired height. Hand tighten both knobs equally.
Again, the knobs should only need to be tightened one
rotation.
WARNING: LiteGait® Handle Bars are designed to be used as
a balance aid while using the LiteGait. Excess loading of the
handle bars may damage handle bars. Avoid Having patients
lift their weigh using the handle bars.
Using Your Lite Gait®