Mobileye AWS-4000, Руководство пользователя, Страница: 15 / 24

C
ONTROL
B
UTTONS
15
To set HMW audio alerts timing perform the following steps:
1. Press the
button once. This will change the system mode to “HMW
Configuration”. The “Headway” icon is lit and remains so as long as the
system is in configuration mode.
2. Press the “ ” and “ ”buttons to increase or decrease timing.
3. Wait 5 seconds for the new settings to take effect.
NOTE: Increasing the timing means the HMW audio alert will be sounded while
your vehicle is at a greater distance from the vehicle ahead than when the default
settings are in effect. If you decrease the timing, the alert will be activated when
your car is relatively close to the vehicle ahead. For example, setting the HMW
audio alert value to 1.2 seconds will cause the system to sound a warning when
headway falls to less than 1.2 seconds.
CAUTIONS:
•
Setting the HMW timing to “OFF” (one level below 0.4 seconds) will
disable the HMW audio alerts.
•
If level “OFF” is selected, the “HW OFF” icon on the Display Unit will be
lit to indicate that HMW audio alerts will not be generated.
•
To enable HMW audio alerts, make sure HMW timing is set to a value
between 0.4 and 2.0.
8.5.2.
Setting LDW Alerts Sensitivity
LDW alerts are issued, by default, up to 0.5 seconds before you swerve out of the lane,
without signaling. You can modify LDW alerts by changing LDW sensitivity. There are
three LDW sensitivity levels: OFF, 1, and 2.
Level 2 is the default. Reducing sensitivity to level 1 will delay the LDW alerts, and
setting the system to OFF will turn off LDW alerts.
WARNING!
Do not change Mobileye AWS-4000 settings while driving.
To set the LDW sensitivity level perform the following steps:
1. Press the button twice. This will change the system mode into “LDW
Sensitivity” configuration. The “LDW” icon is now lit, and will remain lit as
long as the system is in LDW Sensitivity configuration mode.
2. Press the “ ” and “ ”buttons to increase or decrease sensitivity.
3. Wait 5 seconds for the new settings to take effect.
NOTE: Increasing LDW sensitivity means the LDW alerts will be issued when you
have not yet verged from the lane (either physically, or in terms of time to lane
crossing). Decreasing LDW sensitivity will let you get relatively closer to the lane
marking (either physically, or in terms of time to lane crossing), before the alert is
activated. If you select level 1, the warning line is pushed outwards by 20 cm.