Technical Installation Guide (4G) v1.9
www.mobileye.com
11
Mobileye 8 Connect
5.
Connection Description
5.1 Intro
The following paragraphs describe in detail the function and connections of the system’s
components.
5.2 Main unit connections (CAB000400 Rev3.3)
Wire Name & Function
Wire color Connector
Connection To
Signals - (14 pin connector)
Black
J1
Vehicle signals cable
(CAB000371
rev.6.3)
GPS - (5 pins White
connector)
Black
P2
GPS Module and extension cable
CAB00402 Rev 1.1
Table 1: Mobileye 8 Connect cable connections
5.3 Mobileye 8 Connect signals cable (CAB000371
Rev6.3)
The Mobileye 8 Connect signals cable splits into a few cables which connect to the
vehicle power source, to the vehicle CAN-bus (Via CAN Reader connector) , to the
vehicle analog speed signal, to the vehicle high-beams (for IHC), to one of the vehicle’s
analog signals if required (or both analog left- and right-turn indicator signals via diode),
to the EyeWatch display unit (via 4 pin male connector labeled as "EyeWatch" and it
contains a 6-pin female connecter labeled “EyeWatch 8” to provide future connection
for new EyeWatch unit.
A detailed description of each of the wires in the analog cable can be found in the
following table below: