Mobilex A/S
Grønlandsvej 5
DK-8660 Skanderborg
www.mobilex.dk
●
Keep the cord away from heated surfaces.
●
Never block the air openings of the product or place it on a soft surface, such as a bed or
couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and
the like.
●
Never drop or insert any object into any opening or hose.
●
Do not use outdoors or operate where aerosol (spray) products are being used.
●
Connect this product to a properly grounded outlet only. See Grounding Instructions.
Grounding
Before any connection is made, make certain that this product shall be connected to a protective
earth conductor via the three-wire power cord; the three-blade plug shall be inserted only into a
socket outlet that provides a protective earth contact.
3. Description
Product description
The device comes with all the necesary features for efficient decubitus prevention. It consists of
fewseparate elements. No tools are required for assembly. Devices are supplied in carton boxes,
detached in to few elements for easier transportation:
The contents are:
1 Pump
1 Mattress Pad with Inflation Tubes
1 User manual
P05 compressor (pump)
Assembly description
With looking on the picture above the device should be assembled in quite instinctive way. We
recommend you to follow below steps:
●
In the first place take all elements out of the box and check with the list from above if
nothing is missing. If you’d discover at that stage that some part is missing or damaged, do
not continue assembly process. Contact your supplier of the product right away.
●
Lay the mattress pad on a foam base or other regular bed mattress. Do not put it directly on
the bed frame! Please refer to the Specifications section for details.
●
The inflation tubes should be towards the foot end so that they can be connected to the
inflation nozzles on the pump.
●
Cover it with a cotton sheet to avoid direct skin contact and reduce friction.
●
Hang the pump over the frame or board at the foot end of the bed using the foldable hook
hangers. Make sure the pump is secured.
●
Connect the inflation tubes' ends to the mattress pad nozzles and to the pump’s inflating
nozzles. Make sure the tubes are properly attached and that they sit tight on the nozzles.
Rev. 12/15
Page 3 of 6
UM-270016-GB
Pressure-adjust Knob
Inflation Nozzles
(here connect
Inflation Tubes
)
Power Cord
Power Switch
Foldable Hook Hangers
(in the top back side
of the pump).
