MobileView 3008, Руководство по установке

Страница: 96 / 117

Chapter 6: Testing
90 MobileView 3012 Series Installation Manual
MobileView 3012 testing
MobileView 3012 is preconfigured for 12 cameras at 30 fps per camera, dual-
channel audio, and a tag switch on input 1. Configuration tasks require setting
numerous variables and parameters to meet customer and installation
requirements. When you set and save these tasks, you can test the system.
Watchdog on/off
The system watchdog monitors low-level system communication between system
software and hardware. If communication is interrupted for a period of 20
minutes, the watchdog process shuts down and restarts the DVR.
Starting the MobileView 3012 Hardware Monitor program requires stopping low-
level communication and therefore automatically turns off the watchdog.
Watchdog On and Off buttons control watchdog operation. To indicate the
Watc
hdog is off, the front panel LCD displays a “Wdog OFF” message and both
the software and camera status output LEDs blink rapidly. There is no external
indication when the watchdog is running.
LEDs and relays
You can test the software LEDs via the MobileView 3012 Hardware Monitor
program. Check the appropriate box for the LED to test, and then click send
(Figure 81). The LED lights momentarily.
You can also test the relays. Select the relay to activate and click Send
(Figure 82 below). Relay activation is generally audible, but no external display
indicates relay status.
Figure 81: LED options
Figure 82: Relay options