MobileView 3008, Руководство по установке

Страница: 46 / 117

Chapter 3: DVR installation
40 MobileView 3012 Series Installation Manual
Figure 39: MobileView 3012 front panel
MV 3012 Plug 11
Pin Position Harness Wire Color Use
1 Green 12v (Digital Return)
2 Blue Digital Input 12
3 Red Digital Input 10
4 Black GND
5 Grey Digital Input 8
6 Orange Digital Input 6
7 Green 12v (Digital Return)
8 Blue Digital Input 4
9 Red Digital Input 2
10 Green 12v (Digital Return)
11 White Digital Input 11
12 Yellow Digital Input 9
13 Green 12v (Digital Return)
14 Purple Digital Input 7
15 Brown Digital Input 5
16 Green 12v (Digital Return)
17 White Digital Input 3
18 Yellow Digital Input 1
Cable Connections
J1 input power connections
Main power, ground, and ignition are supplied to the 6-pin Molex connector
labeled J1 on the DVR.
J1 harness connections
The J1 harness couples a 6-pin Molex type connector to the J1 connector
(Figure 40 on page 41). This arrangement provides dedicated termination points
for main power, ground, and ignition. Common and specific usage of each
termination point is provided in Table 1 on page 41. Looping outputs are