MobileRobots Pioneer Arm Скачать руководство пользователя страница 2

Страница: 2 / 28

This document, as well as the software described in it, is provided under license and may only be used

or copied in accordance with the terms of the respective license.

Information in this document is subject to change without notice and should not be construed as a

commitment by MobileRobots Inc.

The software on disk, CD-ROM and firmware which accompany the robot and are available for network

download by MobileRobots customers are solely owned and copyrighted or licensed for use and

distribution by MobileRobots Inc.

Developers and users are authorized by revocable license to develop and operate custom software for

personal research and educational use only. Duplication, distribution, reverse-engineering or

commercial application of MobileRobots software and hardware without license or the express written

consent of MobileRobots Inc. is explicitly forbidden.

PeopleBot™, AmigoBot™, PowerBot™, PatrolBot™, ARCSinside™, SetNetGo™, MobilePlanner™,

MobileSim™ and MobileEyes™ are trademarks of MobileRobots Inc. Other names and logos for

companies and products mentioned or featured in this document are often registered trademarks or

trademarks of their respective companies. Mention of any third-party hardware or software

constitutes neither an endorsement nor a recommendation by MobileRobots Inc.

Pioneer Arm Manual

●

Version 7.1

●

January 2007

Содержание Pioneer Arm





























Результаты поиска

Содержание Pioneer Arm

Отзывы:

Похожие инструкции для Pioneer Arm

Бренды по названию

Популярные бренды

MobileRobots Pioneer Arm, Руководство пользователя

Результаты поиска

Содержание Pioneer Arm

Отзывы:

Похожие инструкции для Pioneer Arm

Бренды по названию

Популярные бренды