Mobiak MBK19-PGSGUARD, Инструкция по установке и эксплуатации

Страница: 12 / 24

It is a statutory requirement that the Control Unit is installed by an authorized
electrician. The power to the cooker must be disconnected throughout the entire
installation.
Disconnect the power
Switch off the power at the
consumer unit.
Note!
Do not turn on the
Consumer unit before the Heat
Sensor is set and ready for a
function test.
Connect to the Control Unit
Connect according to the wiring diagram,
see page 24.
CONTROL UNIT
1
I N S T A L L A T I O N
POWER
OFF
2
12