Mobiak 0806293, Руководство пользователя

Страница: 12 / 17

1- Pillow
2- Cover
3- Fastened belts
4- Air Holes (Six of the aerosol rods have vent holes at their ends).
5- Quick connection male
6- Quick connection cover
7- Air supply pipes
8- CPR valve
•
Place the mattress on the bed frame
with the pump tubes on the leg side.
•
Hang the pump on the leg side as
well or on a flat surface.
•
Connect the quick links as shown in
the picture.
INSTALLATION
•
Connect the male part of the quick connection to the
female part where it is located on the pump.
•
Make sure the air supply pipes are not under the
mattress or folded so the air can flow in properly.
•
After the final check, connect the power supply to the
power.
•
Turn on the device.