Mobeye ThermoGuard TwinLog CML2285, Руководство пользователя

Страница: 19 / 40

18
4.8 SYSTEM RESET
To reset a Mobeye CML2285 two steps are necessary, in following sequence:
1. Delete the Mobeye CML2285 from the Mobeye Internet Portal
2. Reset the Mobeye CML2285
1. To delete the Mobeye CML2285 from the Mobeye Internet Portal
Go to "Device Settings" and click on the delete icon in the "Device" block. Then
confirm your choice.
2. To reset the Mobeye CML2285 to its factory settings
1. Remove the batteries (and external power supply).
2. Press the outside button while reinserting the batteries. Keep it pressed for
(about) another 5 seconds.
3. Release the button immediately after the LED starts to flash.
4. If relevant, connect the external power supply.
After a successful reset, the status LED will blink green to indicate that the module is
not configured. The security code is back to factory settings as well.
The SIM card is now disconnected and is visible on the "Add device" screen. The
SIM card can be used again in another (or the same) Mobeye device in combination
with the portal.