Mobeye PowerGuard CM4100, Руководство пользователя

Страница: 14 / 32

13
4.5 HOW TO ACTIVATE THE POWERGUARD
After the previous steps the Mobeye PowerGuard is ready for use. It is armed
automatically.
In order to switch off (disarm) the PowerGuard:
- Press the button at the backside for 1 second. The
green LED switches off to indicate the disarmed
status.
In the disarmed status the Mobeye PowerGuard
will not send alarm notifications. The unit remains
active and is able to switch on time-controlled and
to send test and 'low battery voltage' messages.
In order to switch on (arm) the Mobeye PowerGuard:
- Press the button at the backside for 1 second. The green LED blinks once
every 3 seconds (battery-powered) or stays on continuously (in case of an
external power supply).
If powered externally (with network connection), switching can be done via
SMS commands:
SMS command to switch on: CODE ARM (e.g. 1111 ARM)
SMS command to switch off: CODE DISARM (e.g. 1111 DISARM)
To update the status in the Mobeye Internet Portal: press the button for 5
seconds, or - if the device is externally powered - send a question mark to
the unit (without code).
SMS command status update: ? The status in the portal will be
refreshed (only with external
power).