Mobeye MS100EK, Руководство по установке

Страница: 9 / 24

7
OPERATION
2.8 SWITCHING ON AND OFF
To activate the Mobeye MS100EK, use the installation code or user code.
•
Enter your code
•
Press “OK”
The light turns red shortly and an indication tone is started for a few seconds.
If the code is entered incorrectly 3 times, the indicator turns red and the Mobeye MS100EK will
be blocked for 10 minutes.
The action can
be interrupted at any time, by twice pressing “OK”.
To de-activate the Mobeye MS100EK with your code.
•
Enter your code
•
Press “OK”
The light switches to green and a confirmation melody is played.
2.9 ALARM MESSAGE CONFIRMATION
When the sensor of the (armed!) system is activated, it will send an alarm notification. First an
SMS text message is sent to all programmed alarm numbers; next a phone call is made to the
numbers. When you answer the phone, a beep tone is heard.
Confirm using “1”
It is possible to c
onfirm the phone call by answering the phone and pressing “1“. The other alarm
numbers will not be called afterwards.
2.10 CONTROLLING THE OUTPUTS
The relay outputs can be switched in three ways:
1. Automatically after an alarm (see 6.1)
2. After an incoming call or SMS text message from an authorised telephone number (or,
in case this option was set, unauthorised) (see 5.15 and 5.16).
3. Via the keypad:
Switch on Output 1
CODE menu 311 OK
Switch off* Output 1 CODE menu 310 OK
Switch on Output 2 CODE menu 321 OK
Switch off* Output 2 CODE menu 320 OK
* if an output pulse time was set, the relay outputs will switch back automatically. If the
pulse time was set to
“0”, they shall be switched back manually (see 5.17).