Mobeye MS100E, Руководство по установке

Страница: 20 / 24

16
8. REPORTS AND LISTS
The programmed settings and the Mobeye MS100E status can be requested as SMS-
text message via SMS-command (be sure the unit has network connection).
8.1 STATUS REQUEST
The status can be requested by sending an SMS with the content:
CODE STATUS? The originator of the request receives the armed/not armed status, the
status of the inputs, power and batteries as SMS text message.
8.2 LIST OF SETTINGS
The settings can be requested by sending an SMS with the content:
CODE SET?
The originator of the request receives the list of basic settings.
8.3 AUTHORISATION LIST
The list with authorised numbers for remote control can be requested by sending an
SMS with the content:
CODE ANL?
The originator of the request receives the authorised numbers as list.
8.4 TEST GSM NETWORK STRENGTH
Before using the Mobeye MS100E is it advised to test the GSM signal strength at the
location.
The list with the GSM signal strengths per found network can be requested by sending
an SMS with the content:
CODE GSM?
The originator of the request receives GSM signal strength as list.
Warning
In the event of a weak signal, the Mobeye MS100E can still be used, but there is a risk
that messages cannot be sent or will be received with a delay. In case of no signal, it is
advised to try a different network.