Mobeye MS100E, Руководство по установке

Страница: 12 / 24

8
5. CONFIGURATION POSSIBILITIES
This chapter describes the possible settings in the Mobeye MS100E.
5.1 INSTALLATION CODE
The installation code is the 4-digit code for switching on/off and programming the
settings or activating
the special functions. Factory default is “1111”. It is possible to
change the code to any 4-digit number. Please change the code to make the unit more
secure.
5.2 TELEPHONE NUMBERS
Up to five telephone numbers can be programmed in to the Mobeye MS100E. In the
event of an alarm the Mobeye MS100E first sends an SMS text message to all numbers,
next they are called. It is possible to confirm the call, after which the other numbers will
not be called anymore.
Note: the first telephone number is required, the others are optional.
5.3 SMS ON/OFF
By default, the Mobeye MS100E sends alarm notifications via text message and calls to
the preset contact persons. By turning off the SMS, the unit will only call after the
sensors send an alarm.
5.4 CALL ON/OFF
By default, the Mobeye MS100E sends alarm notifications via text message and calls to
the preset contact persons. By turning off the CALL, the unit will only send an SMS text
message as alarm notification. It is not possible to switch off both the SMS and the call.
5.5 INTERVAL TEST MESSAGE
The Mobeye MS100E can send test messages. Through these
‘keep alive’ reports you
will be informed about the status of your Mobeye MS100E. You can set the interval
between the test reports. This is adjustable between 0 (no test reported) and 30 (every
30 days a test message). Note when MS100E is battery-operated: the interval of 1 day
will result in a daily test message; the exact time between the messages will be about 24
hours.
The smaller the interval between the test reports, the shorter is the battery life. The test
message only works if the system is on.
5.6 SET ACTUAL TIME AND DATE
If the system is to be armed automatically, the internal clock time needs to be correct.
Some Telecom providers offer this in the network, to be synchronised by the Mobeye
MS100E during the start-up and after sending test messages. It is possible to set the
time and date manually. To view the clock time, send a list of the settings to the first
programmed phone number (CODE SET?).
5.7 AUTOMATIC TIME-BASED ARM/DISARM
The MS100E can be armed and/or disarmed based on a daily time schedule. The first
telephone number needs to be set before the arming and/or disarming time can be set.