Mobeye CM4300FS, Руководство пользователя

Страница: 15 / 32

14
How to activate the WaterGuard-FS
After the previous steps the Mobeye WaterGuard-FS is ready for use. It is
armed automatically.
In order to switch off (disarm) the WaterGuard-FS:
- Press the button at the backside for 1 second. The
green LED switches off to indicate the disarmed
status.
In the disarmed status the Mobeye WaterGuard-
FS will not send alarm notifications. The unit
remains active and is able to switch on time-
controlled and to send test and 'low battery
voltage' messages.
In order to switch on (arm) the Mobeye WaterGuard-FS:
- Press the button at the backside for 1 second. The green LED blinks once
every 3 seconds (battery-powered) or stays on continuously (in case of an
external power supply).
If powered externally (with network connection), switching can be done via
SMS commands:
SMS command to switch on: CODE ARM (e.g. 1111 ARM)
SMS command to switch off: CODE DISARM (e.g. 1111 DISARM)
To update the status in the Mobeye Internet Portal: press the button for 5
seconds, or - if the device is externally powered - send a question mark to
the unit (without code).