Mobatime DTS 4138.timeserver, Монтаж и инструкция по эксплуатации, Страница: 31 / 104

© MOBATIME 31 / 104 800870.05
Notice:
Redundant Multicast time server:
If two NTP servers in the same network should send NTP with the same
Multicast IP address (redundancy), then the first time server has to be
configured with a small
pollinterval
(e.g. 2  4 sec.) and second time
server with a large pollinterval (min. 100 x larger, e.g. 9  512 seconds).
As long as the first time server is sending NTP Multicast packets, the
packets from second time server are ignored. This configuration is
needed, to reach a defined situation for the end devices (the DTS with the
more frequently NTP send rate gets higher priority for time reception).
Time zone table for the NTP slave clock line:
Display of all time zone entries (15) of time zone servers for NTP slave clock lines.
Choose a zone number to change selected zone.
Time zone selection

see chapter “6.5.25 Time zone selection“.
The page can be exited with 99. Changes are first stored or reset on the overlying
menu page.
6.5.7 Time administration
Under time administration, settings can be undertaken for the following functions:

Time source configuration  see chapter “6.5.8 Time source “

Time adjustment configuration  see chapter “6.5.9 Time
adjustment / Time-
keeping
“

Redundant operation  see chapter “6.5.10 Redundant operation“

NTP Server

see chapter "6.5.11 NTP server"

For setting the time manually  see chapter “6.5.12 Manual time set / Leap second“