Retro Fridge
- English manual
9
EN
SETTING UP APPLIANCE
Unpacking:
- This product has been packaged to protect it against transportation
damage. Remove all packaging materials from around and inside the
appliance, but do not remove any foam insulation surrounding the
pipes at the back. Keep the original packaging carton and materials
in a safe place; it will help prevent any damage if the product needs to
be transported in the future, and you can use it to store the appliance
when it is not in use. If the carton is to be disposed of, please recycle
all packaging materials where possible.
- Plastic wrapping can be a suffocation hazard for babies and young
children, so ensure all packaging materials are out of their reach and
disposed of safely.
- Parts: Check to ensure you have all the parts pictured on the previous
page spread.
- Unwind the power cord to its full length and inspect it for damage. Do
not use the appliance if the appliance or its cord has been damaged
or is not working properly. In case of damage, contact our after-
sales support line for advice on examination, repair, or return of the
damaged product.
- Make sure the refrigerator is disconnected from the power supply
before cleaning the interior surfaces and all internal accessories with
lukewarm water, a soft cloth, and a neutral/mild soap/detergent. This
will remove any dust from transit and storage and help remove the
typical smell of a brand new product. Then dry thoroughly. Important:
do not use harsh or abrasive detergents or powders as these will
damage the finish.